For decoration of the facade of a residential building, flat -relief modeling began to be widely used. Professionals are advised to use for the manufacture of platbands, columns, smokes templates.
Where a flat -relief modeling is applied?
Flat -fan -relief modeling is applied to the surface of the house, which is not plastered. To make, for example, the platband, use a wooden template. First you need to make a sketch of the future platband. On the right material you need to apply the platform pattern. Then it is necessary to transfer the platform to the board with a thickness of 25 mm, cut the platband on this template. The details of the created template for the platband should be with edges located in one plane. In the house, everything should correspond to the modern style and beauty, a person who lives by this principle can achieve a lot, so it is important for us that the houses are beautiful and multifunctional, have a large level of security. If you live in Yekaterinburg, then it is important to buy sectional gates in Yekaterinburg, since it is they who are able to qualitatively protect your house.
What can be done with the inner frame?
The inner frame must be attached to the window with nails. Make sure that its contours exceeds the frame of the frame by 3 mm, they should not interfere with the window to open. Limiters for the platband (its width) will serve two external rails. They can be fixed with nails. The same actions are made for the rail of the lower. From three -layer plywood you need to cut the strip, then steam, bend it according to the template, dry it. Cut in such a way that the layers of veneers go across the strips. Only then will it warm well, not break. Then nail the resulting workpiece to plaster.
We prepare internal templates, they are needed in order to apply the drawing. To decorate the columns, platbands, a template from the heares is made with a ladder. It is important to take into account – two long -time rails must represent a trapezoid in a section.
The technology according to which a flat -reliable modeling is created is adhered to the technology according to which the facade is made, covered with plaster.